Categories

If you are going to apply waterproofing, just opening the can and applying it evenly will not work ❌ To save time and money, you must prepare the following (5) things before applying the paint 👇 💡 Essential preparation points 🧹 1. Clean the surface (Surface Cleaning) Clean the area to be painted to remove dust, sand, dirt, grease, and algae. If there is dirt on the surface, the paint will not fully adhere to the concrete and will easily peel off in a short time. 🛠 2. Repair cracks (Crack Repair) If there are cracks in the wall or roof, do not apply waterproofing evenly. Cracks must be completely repaired with a suitable Crack Sealant or Putty. ☀️ 3. Make sure the surface is completely dry (Moisture Check) Do not apply waterproofing when it is wet after rain or washing. Only when the surface is completely dry can the paint penetrate and adhere to the surface. 🎯 4. Choose the Right Type Roof (Slab/Roof)... Bathroom (Bathroom)... External Wall (External Wall)... The type of paint to be used is different. Choose the right type according to the location, such as UV Resistant or for areas that will be constantly wet. 🖌 5. Check if a primer is needed. Not all waterproofing paints require a primer. Check the instructions for each product and apply a primer first if necessary. This will help the waterproofing paint adhere better to the surface. 💡If you prepare these points carefully and apply the waterproofing solution according to the instructions (for example, applying the first and second coats in a crisscross pattern), you will be able to avoid water leakage problems during the rainy season in the long run! 💯🌧